|
 |
Solid FLEX-Drain®
Available in 12' and 25' lengths
A solid pipe, appropriate in applications that involve
moving water from one point to another (i.e. away from
downspouts). Does not allow water to seep in or out
anywhere except pipe ends.
Helpful instructions - Printer Friendly Version (PDF
format)
Product Testing Results
12' Solid
FLEX-Drain® UPC Code 732736506005
25' Solid FLEX-Drain® UPC Code 732736500102
|
 |
 |
|
 |
Perforated FLEX-Drain®
Available in 12' and 25' lengths
A pipe with spaced slits, appropriate for ground water
drainage (French drains, dispersing water from flower
beds) in applications where surrounding soil is coarse
enough not to pose a clogging threat and/or surrounding
debris is minimal.
Helpful instructions - Printer Friendly Version (PDF
format)
Product Testing Results
12' Perforated FLEX-Drain® UPC Code 732736508009
25' Perforated FLEX-Drain® UPC Code 732736501208
|
 |
 |
|
 |
Perforated
FLEX-Drain® with Sock
Available in 25' lengths
A pipe with spaced slits, covered with removable
polyester sock. Appropriate for ground water drainage
(French drains, dispersing water from flower beds) in
applications where surrounding soil or sand is fine
enough to require filtration and/or surrounding debris
is considerable.
Helpful instructions - Printer Friendly Version (PDF
format)
Product Testing Results
25' Perforated FLEX-Drain® with Sock UPC Code
732736501253
|
|
 |
 |
|
|

|
FLEX-Drain® Coupler
Female coupler for joining 2 cut pieces of FLEX-Drain
together. It can also be used to adapt FLEX-Drain® to some
wyes and tees to improve the fit and function of the overall
system
|
 |
 |

|
FLEX-Connector™
Expands up to 21” to connect 4” corrugated piping , PVC and
many other 4” pipes together. Creates any angle or turn,
and expands to reach pipes that have been cut short, and is
an excellent repair piece for damaged sections of pipe
|
 |
 |
 
|
Flexible Downspout Adaptor
Available in both 3 x 4 x 4" and 2 x 3 x 4" sizes, it is
used to connect your downspout to FLEX-Drain®, 4” standard
corrugated Pipe, 4” PVC, and most other 4” pipe. The
flexible design allows an easier connection with more
versatility than standard rigid adaptors.
|
 |
 |

|
Flexible Elbow
Bends to any shape, not just 90 degrees. Allows you to the
ability to create endless angles, and adjust for length
between pipe pieces, plus interconnect most 4” pipes
together.
|
 |
 |
 |
I.D. to I.D. Pipe Connector
The low cost solution for connecting FLEX-Drain®, Corrugated
Pipe, 4” PVC, and many other 4” pipe together.
|
|
|

 |